ABOUT THE PROJECT
The SOURCE AUREO project is a collaborative FPV frame project initiated by Team BlackSheep.
The frame is donated to the community to empower creators and makers,
and integrate best practices and current trends faster into a continuously manufactured product.
In return, it allows the local distribution network to have cheap and direct access to a good frame
in order to allow them compete in an increasingly predatory marketplace.
The hope is for this frame to enable broad access to FPV thanks to a low price point,
great documentation and wide availability of compatible parts and accessories,
without violating other people’s intellectual property.
GET INVOLVED!
Project discussion: https://discordapp.com/invite/ZJGkHwF
Project files: https://github.com/ps915/source_aureo
3D-printed accessories: https://www.thingiverse.com/tag:sourceaureo
IN THE BOX
1 x Frame
1 x Nylon SLS Printed Pod
1 x Screw Set (Motor Screws Included!)
SPECS
Wheelbase: 260mm
Plate: 7mm
Motor Mount: 19x19, 16x16, 12x12
Stack Mout: 4mm
Frame weight: 49.5
65,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
GET INVOLVED!
Project discussion: https://discordapp.com/invite/ZJGkHwF
Project files: https://github.com/tbs-trappy/source_one
Interactive Manual (work in progress)
3D Printed files on Thingiverse: https://www.thingiverse.com/tag:sourceone
3D Printed Parts (STL) also avaialble on github!
PACKAGE CONTAINS:
1x Frame (Top, Bottom. Brace and 2x Camera plate, 4x Arms)
1x Screw & Standoff set
37,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
10,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
GET INVOLVED!
Project discussion: https://discordapp.com/invite/ZJGkHwF
Project files: https://github.com/tbs-trappy/source_one
Interactive Manual (work in progress)
3D Printed files on Thingiverse: https://www.thingiverse.com/tag:sourceone
3D Printed Parts (STL) also avaialble on github!
PACKAGE CONTAINS:
1x Frame (Top, Bottom. Brace and 2x Camera plate, 4x Arms)
1x Screw & Standoff set
TECHNICAL SPECIFICATIONS:
Wheelbase 5": 226mm
Wheelbase 6": 263mm (not sold)
Wheelbase 7": 300mm
Top Plate: 2mm
Bottom Plate: 3mm
Standoff height: 30mm
Arm thickness 5": 4mm
Arm thickness 6": 4mm (not sold)
Arm thickness 7": 6mm
Stack Mounting: 30.5 × 30.5mm & 20 x 20
Weight 5": 145.1g
HARDWARE:
20x M3x10 allen screw
4x M3x14 allen screw
8X OD 5mm M3 30mm standoff
8x M3 press insert nut
26,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
Arm Thickness: 4mm
Single Arm Weight: 13g
Arm Center Width: 15mm
Motor Mount Width: 38mm
10,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
SPEZIFIKATION
Größe : 114mm
Composite : Kohlefaser 2mm
Gewicht : 6,3 g
Montage in : 16 mm x 16 mm ODER Whoop AIO Modell 24-26 mm
Kamera in : 16 mm, m2 Schraube
Max Prop: 2.5" - empfohlenes T2x2.5
Motorlager : 12xx, 11xx, 0905 (dreieckige und quadratische Konfiguration)
INCLUDES
Carbonrahmen
TPU Canopy
Abstandshalter und Schrauben
Batteriepolster und Gummiband
Crossfire Nano RX / Unify Pro32 Nano-Einfassungskarte
Alle Kabel und Stiftköpfe benötigt.
25,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen