SPECS
· Item: Beta95X V3 Whoop Quadcopter
· Weight: 99.1g (without battery)
· Wheelbase: 95mm
· FC: F4 AIO 20A Toothpick FC V4
· Frame: Beta95X V3 Frame Kit
· Motors: 1106 3800KV Brushless Motor
· Props: Gemfan D63 5-Blades Props
· Receiver Option: Frsky FCC/Frsky LBT/TBS/PNP
· Camera: EOS Camera
· FPV Camera Degree: 25°- 45°
· VTX: M02 25-250mW 5.8G VTX
· Camera Mount: SMO 4K camera Mount
· HD Camera Mount Degree: 5°- 45°
· Antenna: Air 5.8GHz Antenna (RHCP)
· Battery: 450mAh 4S battery(Not including)
· Charge Connector: XT30
· Flight time: About 4.5 min flight with 450mAh 4S battery
Camera & VTX
Customized EOSV2 micro FPV camera is also provided on Beta95X V3 Whoop Quadcopter, brings a high-quality video and low RF interference. In addition, M02 25-350mW VTX is a high-quality 5.8GHz VTX including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun.
FC & ESC
Beta95X V3 series whoop drone is equipped with the new released F4 20A AIO toothpick brushless FC, it extremely reduces the weight while improving the ability of the ESC to continuous current 20A, and brings pilots more power to fly the Beta95X V3 quad! Meanwhile, the new 20A FC V4 adds 2 pin connector ports for DJI Digital VTX and Rx, just plug & play, less solder work needed, super easy to install.
Motor & Props
Gemfan D63 5-Blades Props is designed for the inverted installation, and it brings pilots a smooth flight! Meanwhile, compared with D63 3-blades propellers, D63 5-blade props are more durable and more powerful, offers pilots a high-efficiency flight experience. Equipped with the 1106 3800KV Brushless Motor, it brings a stronger power and lower noise, which will give pilots an unprecedented flying experience.
· 1 * Beta95X V3 Whoop Quadcopter
· 1 * Gemfan D63 5-blades Propellers(2CW+2CCW)
· 1 * 20mm FPV Camera Mount
· 1 * Spare EVA Foam Tape
· 1 * USB Adapter Board for FC
· 1 * Adopter Cable for Customized Naked Camera
199,00 €
inkl. MwSt, versandkostenfrei in bestimmte Länder
Versandkostenfrei in folgende Länder: Deutschland, Österreich Mehr anzeigen Weniger anzeigen
SPECS
Wheelbase: 100mm
Color: Black
Material: PA12
Weight: 39.09g
18,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
Uses the lightest F4 1S Brushless AIO FC which weighs 3.8g without a cable.
This FC has the efficient STM32F411CEU6 processor and tuned BETAFPVF411(BEFH),
which allows for maximum weight savings.
Equipped with BetaFPV’s exclusively designed BT2.0 connector,
it can support 9A continuous current and 15A burst while the PH2.0 connector uses 4.5A continuous current
The highly efficient combination of the light 1102 13500KV motor
and durable 65mm 2- blade props deliver a drone with excellent flight performance
and achieves a great noise-reducing function
Super light with a total weight of 28.09g, installed with the customized HX100 SE carbon fiber frame
The drone comes with BT2.0 - PH2.0 adapter cable in default,
which is convenient for customer who uses PH2.0.
We also released the BT2.0 tester and charger,
its charging current has been upgraded from 0.5A to 1A, which makes the charging speed 2 times faster.
SPECS
Item: HX100 SE FPV Quad
Weight: 28.09g (without battery)
FC&ESC: F4 1S AIO FC
Motors: 1102 13500KV Motors
Props: Gemfan 65mm 2-blade props(1.5mm shaft hole)
Camera: C01 Camera
VTX: Integrates 25mW VTX
Frame: HX100 SE Carbon Fiber Frame
Canopy: Canopy for HX100 SE
Receiver Option: Frsky XM
Battery: BT2.0 300mAh 1S Battery
Flight time: 4 mins in a smooth outdoor flight,
2:30 mins in full throttle outdoor flight
IN THE BOX
1 * HX100 SE FPV Quad
1 * BT2.0 300mAh 1S Battery
1 * BT2.0-PH2.0 Adapter Cable
89,00 €
inkl. MwSt, versandkostenfrei in bestimmte Länder
Versandkostenfrei in folgende Länder: Österreich Mehr anzeigen Weniger anzeigen
SPECS
Gewicht: 99 g (ohne HD-Kamera oder Akku)
Motordiagonale: 95 mm
Rahmen: Beta95X-Rahmen
FC: F405 Flight Controller & 16A BLHeli_32 ESC V2.0
VTX: M02 25-350 mW 5,8 G VTX
Motoren: 1106 4500KV Brushless Motor
Propeller: Gemfan D63 3-Blatt Propeller
Empfängeroption: TBS Crossfire
Kamera: BETAFPV Caddx EOS V2 Kamera
FPV-Kameragrad: 25 ° -45 °
Kamerahalterung: 15 ° (Sie finden auch eine STL-Datei mit 25 ° Kamerahalterung zum selbst 3D Drucken auf der BetaFPV Seite)
Batterie: 450mAh 4S Batterie (nicht enthalten)
Flugzeit: ca. 3,5 min mit 450mAh 4S 75C Batterie
IN THE BOX
1 * Beta95X V2 Whoop Quadcopter
1 * Insta360 GO Kamerahalterung
1 * Naked GoPro Kamerahalterung
1 * Case für Naked Camera V2
1 * BEC Board für Naked Camera
1 * D63 3-Blatt-Propeller (2CW + 2CCW)
1 * Schraubensatz
,
169,00 €
inkl. MwSt, versandkostenfrei in bestimmte Länder
Versandkostenfrei in folgende Länder: Deutschland, Österreich Mehr anzeigen Weniger anzeigen
SPECS
Material: Carbon Fiber
Diagonal motor distance: 115mm
Thickness: 4mm
Motor mounting hole: M2*4
FC mounting hole: 26.5mm x 26.5mm
Weight: 9.4g
Recommended Parts
Propellers: HQ 3020 2-Blade Props / HQ 3030 3-Blade Props
Canopy: Canopy for HX115
Motors: 1105 5000KV Motors / 1106 5000KV Motors / 1204 5000KV Motors
Batteries: 450mAh 4S battery / 450mAh 3S battery
FC&ESC: Toothpick F4 2-4S 12A AIO FC
Drone: HX115 FPV Toothpick Drone / HX115 HD Toothpick Drone
IN THE BOX
1 * HX115 Carbon Fiber Frame
1 * 150mm Battery Cable Tie
1 * No-Slip Rubber Pads
1 * Pack of Screws
1 * Ruber dampers
8 * HX115 aluminum column
18,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
Der TWIGLET MINI ist ein 1,5 mm dicker 2" True-X-Rahmen mit 85 mm (Motor zu Motor),
der Platz für bis zu 2-Zoll-Propeller bietet.
Er besteht aus sehr hochwertigem Carbon und ist auf beiden Seiten mit 0,6 mm abgeschrägt.
Er sieht nicht nur fantastisch aus, sondern ist auch weitaus langlebiger als die meisten anderen seiner Klasse!
SPECS
Modell: TWIGLET
Größe: 2,5 Zoll
Abmessungen: 100 mm True-X
Fase: 0,6 mm
Stackmontage: 25.5 x 25.5 mm Whoop
Motormontage: 9 mm 4 x 2,1 mm oder 6,6 3 x 1,6 mm
Gewicht: 5,3 g
12,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
The ET5 is a mutated TWIG frame that can accommodate 5" props.
The frame is premium 3.5mm thick high grade T700 carbon
cut along the weave and chamfered on both sides interior and exterior edges at .8mm.
The frame measures approximately 200mm from motor post to motor post.
Motor mounting is for 4-hole 9x9 or 12x12 motor mounts.
You do not have to use t-mount motors as there are also a lot of 5mm shaft
motors from 15xx to 16xx that are great choices
as well as lots of 5mm 5" shaft props to choose from on the market.
We highly recommend keeping your motors under 18 grams since this is a lightweight frame.
Bullet point
High grade 3.5mm thick T700 carbon cut along the weave
and chamfered on both sides interior and exterior edges at .7mm
20*20 or whoop/toothpick stack mounting
Slotted motor mounts for 9*9 to 12*12mm motors
5-55 degree camera angle adjusment
We provide the single frame and the frame kit for your choice
SPECS
Model: TWIG ET5
Size: 5 inch
Material: T700 Carbon Fiber
Wheelbase: 200mm
Weight: 33.6g
Thickness: 3.5mm
Recommended parts
Flight Controller: Toothpick F4 20A AIO FC
Motor: 1505 Motors
Compatible Propellers: HQ T5X3X2 Props
Battery: 4S 850mAh
IN THE BOX
1 * TWIG ET5 5" Toothpick Frame
28,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
SPECS
Material: T700 Carbon Fiber
Wheelbase: 4'': 160mm, 5'': 200mm
Weight: 4'': 24.43g, 5'': 34.89g
Frame Height: 8mm
Top plate thickness: 1.5mm
Bottom plate thickness: 1.5mm
Arm thickness: 4mm
Battery protected plate thickness: 1.5mm
Motor mounting hole for 4'' : 9×9 or 12×12 for M2
Motor mounting hole for 5'' : 16×16 or 19×19 for M3
FC mounting hole: 26.5mm x 26.5mm
INCLUDED
1* Top plate
1* Bottom plate
4* Arms
1* Battery protected plate
8* M2×9 Countersunk screws
4* M2×6 Screws
4* M2×10 Screws
8* M2 Nuts
1* Battery strap
2* Anti-slip Battery mats
2* 3mm Anti-impact Battery mats
18,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
HD Digital VTX Canopy wurde speziell für die Digital VTX-Kamera entwickelt und für alle Caddx Vista-Kameras angepasst. Es sieht nicht nur aus wie ein X-Knight-Helm, sondern bietet der Kamera auch den besten Schutz. Diese HD Digital VTX Haube passt auf alle brushless BETAFPV 75 mm-, 85 mm- und 95 mm-Whoop-Rahmen. Mit der erhöhten Halterung eignet sich diese Canopy außerdem für alle digitalen VTX-Drohnen der TWIG X-Knight-Serie.
Gewicht: 3,87 g
Kamerawinkel: 25°-45°
Material: PP
10,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
passend für Beta95X/Beta85X/ Beta75X/ Beta75 pro 2/ TWIG XL/ X-KNIGHT 4
This Mini Canopy fits 19x19mm or 20x20mm FPV cameras,
like the Caddx Turtle V2, Caddx Vista Digital HD System,
RunCam Racer 3 & co.
8,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen