BETAFPV  -  frames


BETAFPV 95X V3 - TBS CSFR

 

 

 

SPECS

·         Item: Beta95X V3 Whoop Quadcopter

·         Weight: 99.1g (without battery)

·         Wheelbase: 95mm

·         FC: F4 AIO 20A Toothpick FC V4

·         Frame: Beta95X V3 Frame Kit

·         Motors: 1106 3800KV Brushless Motor

·         Props: Gemfan D63 5-Blades Props

·         Receiver Option: Frsky FCC/Frsky LBT/TBS/PNP 

·         Camera: EOS Camera

·         FPV Camera Degree: 25°- 45° 

·         VTX: M02 25-250mW 5.8G VTX

·         Camera Mount: SMO 4K camera Mount

·         HD Camera Mount Degree: 5°- 45° 

·         Antenna: Air 5.8GHz Antenna (RHCP)

·         Battery: 450mAh 4S battery(Not including) 

·         Charge Connector: XT30

·         Flight time: About 4.5 min flight with 450mAh 4S battery

 

 

Camera & VTX

Customized EOSV2 micro FPV camera is also provided on Beta95X V3 Whoop Quadcopter, brings a high-quality video and low RF interference. In addition, M02 25-350mW VTX is a high-quality 5.8GHz VTX including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun. 

 

FC & ESC

Beta95X V3 series whoop drone is equipped with the new released F4 20A AIO toothpick brushless FC, it extremely reduces the weight while improving the ability of the ESC to continuous current 20A, and brings pilots more power to fly the Beta95X V3 quad! Meanwhile, the new 20A FC V4 adds 2 pin connector ports for DJI Digital VTX and Rx, just plug & play, less solder work needed, super easy to install.

 

Motor & Props

Gemfan D63 5-Blades Props is designed for the inverted installation, and it brings pilots a smooth flight! Meanwhile, compared with D63 3-blades propellers, D63 5-blade props are more durable and more powerful, offers pilots a high-efficiency flight experience. Equipped with the 1106 3800KV Brushless Motor, it brings a stronger power and lower noise, which will give pilots an unprecedented flying experience.

 

 

·         1 * Beta95X V3 Whoop Quadcopter

·         1 * Gemfan D63 5-blades Propellers(2CW+2CCW)

·         1 * 20mm FPV Camera Mount

·         1 * Spare EVA Foam Tape

·         1 * USB Adapter Board for FC

·         1 * Adopter Cable for Customized Naked Camera

 

 

199,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1

BETAFPV HX100 SE - FRSKY-EULBT

 

Uses the lightest F4 1S Brushless AIO FC which weighs 3.8g without a cable.

This FC has the efficient STM32F411CEU6 processor and tuned BETAFPVF411(BEFH),

which allows for maximum weight savings.

Equipped with BetaFPV’s exclusively designed BT2.0 connector,

it can support 9A continuous current and 15A burst while the PH2.0 connector uses 4.5A continuous current

The highly efficient combination of the light 1102 13500KV motor

and durable 65mm 2- blade props deliver a drone with excellent flight performance

and achieves a great noise-reducing function

Super light with a total weight of 28.09g, installed with the customized HX100 SE carbon fiber frame

The drone comes with BT2.0 - PH2.0 adapter cable in default,

which is convenient for customer who uses PH2.0.

We also released the BT2.0 tester and charger,

its charging current has been upgraded from 0.5A to 1A, which makes the charging speed 2 times faster.

 

 

SPECS

Item: HX100 SE FPV Quad

Weight: 28.09g (without battery)

FC&ESC: F4 1S AIO FC

Motors: 1102 13500KV Motors

Props: Gemfan 65mm 2-blade props(1.5mm shaft hole) 

Camera: C01 Camera

VTX: Integrates 25mW VTX

Frame: HX100 SE Carbon Fiber Frame

Canopy: Canopy for HX100 SE

Receiver Option: Frsky XM

Battery: BT2.0 300mAh 1S Battery

Flight time: 4 mins in a smooth outdoor flight,

2:30 mins in full throttle outdoor flight

 

IN THE BOX

1 * HX100 SE FPV Quad

1 * BT2.0 300mAh 1S Battery

1 * BT2.0-PH2.0 Adapter Cable

 

110,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1

Beta95X V2

 

SPECS

Gewicht: 99 g (ohne HD-Kamera oder Akku)

Motordiagonale: 95 mm

Rahmen: Beta95X-Rahmen

FC: F405 Flight Controller & 16A BLHeli_32 ESC V2.0

VTX: M02 25-350 mW 5,8 G VTX

Motoren: 1106 4500KV Brushless Motor

Propeller: Gemfan D63 3-Blatt Propeller

Empfängeroption: TBS Crossfire

Kamera: BETAFPV Caddx EOS V2 Kamera

FPV-Kameragrad: 25 ° -45 °

Kamerahalterung: 15 ° (Sie finden auch eine STL-Datei mit 25 ° Kamerahalterung zum selbst 3D Drucken auf der BetaFPV Seite)

Batterie: 450mAh 4S Batterie (nicht enthalten)

Flugzeit: ca. 3,5 min mit 450mAh 4S 75C Batterie

 

IN THE BOX

1 * Beta95X V2 Whoop Quadcopter

1 * Insta360 GO Kamerahalterung

1 * Naked GoPro Kamerahalterung

1 * Case für Naked Camera V2

1 * BEC Board für Naked Camera

1 * D63 3-Blatt-Propeller (2CW + 2CCW)

1 * Schraubensatz

,

195,00 €

169,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1

HX115 T700 Toothpick Frame Kit

 

SPECS

Material: Carbon Fiber

Diagonal motor distance: 115mm

Thickness: 4mm

Motor mounting hole: M2*4

FC mounting hole: 26.5mm x 26.5mm

Weight: 9.4g

 

Recommended Parts

Propellers: HQ 3020 2-Blade Props / HQ 3030 3-Blade Props

Canopy: Canopy for HX115

Motors: 1105 5000KV Motors / 1106 5000KV Motors / 1204 5000KV Motors

Batteries: 450mAh 4S battery / 450mAh 3S battery

FC&ESC: Toothpick F4 2-4S 12A AIO FC

Drone: HX115 FPV Toothpick Drone / HX115 HD Toothpick Drone

 

 

IN THE BOX

1 * HX115 Carbon Fiber Frame

1 * 150mm Battery Cable Tie

1 * No-Slip Rubber Pads

1 * Pack of Screws

1 * Ruber dampers

8 * HX115 aluminum column

 

18,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1

TWIGLET 2,5" Frame

 

 

Der TWIGLET MINI ist ein 1,5 mm dicker 2" True-X-Rahmen mit 85 mm (Motor zu Motor),

der Platz für bis zu 2-Zoll-Propeller bietet.

Er besteht aus sehr hochwertigem Carbon und ist auf beiden Seiten mit 0,6 mm abgeschrägt.

Er sieht nicht nur fantastisch aus, sondern ist auch weitaus langlebiger als die meisten anderen seiner Klasse!

 

SPECS

Modell: TWIGLET 

Größe: 2,5 Zoll

Abmessungen: 100 mm True-X

Fase: 0,6 mm

Stackmontage: 25.5 x 25.5 mm Whoop

Motormontage: 9 mm 4 x 2,1 mm oder 6,6 3 x 1,6 mm

Gewicht: 5,3 g

 

12,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1

BETAFPV TWIG ET5 - 5" TOOTHPICK

 

The ET5 is a mutated TWIG frame that can accommodate 5" props.

The frame is premium 3.5mm thick high grade T700 carbon

cut along the weave and chamfered on both sides interior and exterior edges at .8mm.

The frame measures approximately 200mm from motor post to motor post.

Motor mounting is for 4-hole 9x9 or 12x12 motor mounts.

You do not have to use t-mount motors as there are also a lot of 5mm shaft

motors from 15xx to 16xx that are great choices

as well as lots of 5mm 5" shaft props to choose from on the market.

We highly recommend keeping your motors under 18 grams since this is a lightweight frame.

 

Bullet point

High grade 3.5mm thick T700 carbon cut along the weave

and chamfered on both sides interior and exterior edges at .7mm

20*20 or whoop/toothpick stack mounting

Slotted motor mounts for 9*9 to 12*12mm motors

5-55 degree camera angle adjusment

We provide the single frame and the frame kit for your choice

 

SPECS

Model: TWIG ET5

Size: 5 inch

Material: T700 Carbon Fiber

Wheelbase: 200mm

Weight: 33.6g

Thickness: 3.5mm

 

Recommended parts

Flight Controller: Toothpick F4 20A AIO FC

Motor: 1505 Motors

Compatible Propellers: HQ T5X3X2 Props

Battery: 4S 850mAh

 

 

IN THE BOX

1 * TWIG ET5 5" Toothpick Frame 

 

28,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1

BetaFPV X-Knight 4'' FPV Toothpick Frame

 

 

SPECS

Material: T700 Carbon Fiber

Wheelbase: 4'': 160mm, 5'': 200mm

Weight: 4'': 24.43g, 5'': 34.89g

Frame Height: 8mm

Top plate thickness: 1.5mm

Bottom plate thickness: 1.5mm

Arm thickness: 4mm

Battery protected plate thickness: 1.5mm

Motor mounting hole for 4'' :  9×9 or 12×12 for M2

Motor mounting hole for 5'' : 16×16 or 19×19 for M3

FC mounting hole: 26.5mm x 26.5mm

 

INCLUDED

1* Top plate

1* Bottom plate

4* Arms

1* Battery protected plate

8* M2×9 Countersunk screws

4* M2×6 Screws

4* M2×10 Screws

8* M2 Nuts

1* Battery strap

2* Anti-slip Battery mats

2* 3mm Anti-impact Battery mats

 

27,00 €

18,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1

BetaFPV HD Digital VTX Canopy, blau, zweiteilig

HD Digital VTX Canopy wurde speziell für die Digital VTX-Kamera entwickelt und für alle Caddx Vista-Kameras angepasst. Es sieht nicht nur aus wie ein X-Knight-Helm, sondern bietet der Kamera auch den besten Schutz. Diese HD Digital VTX Haube  passt auf alle brushless BETAFPV 75 mm-, 85 mm- und 95 mm-Whoop-Rahmen. Mit der erhöhten Halterung eignet sich diese Canopy außerdem für alle digitalen VTX-Drohnen der TWIG X-Knight-Serie.

Gewicht: 3,87 g

Kamerawinkel: 25°-45°

Material: PP

10,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1

The BETAFPV Mini Canopy V3

 

passend für Beta95X/Beta85X/ Beta75X/ Beta75 pro 2/ TWIG XL/ X-KNIGHT 4

This Mini Canopy fits 19x19mm or 20x20mm FPV cameras,

like the Caddx Turtle V2, Caddx Vista Digital HD System,

RunCam Racer 3 & co.

 

 

8,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1