ZEEZ Desing FC


ZEEZ F7 STACK inkl. LED (30/30)

 

Zeez F7 Specifications:

Mounting holes: 30×30

Up to 8S input (max 36V)

5V BEC up to 3A continuous

STM32F722 MCU (Support BetaFlight, EmuFlight, INav)

MPU6000 Gyro/ACC for smooth performance

128MB Onboard flash

OSD chip Onboard

6 available UART

VTX switch to control the ON/OFF of the VTX

directly from your transmitter

LC Filter for 5V VTX

USB Type C connector

Onboard RGB LED distribution for clean wiring

to the LED on the arm of the quad.

Onboard RBG LED

Notch design on sides and in the front of the – FC

for better fitting on the frame.

Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano 

Logic Side and USB current protection

 

Zeez ESC 4in1 60A Specifications:

Mounting holes: 30×30

Input: 3S to 6S

High quality Mosfet: 60A continuous current draw /90A peak current

Aluminum HeatSink to cooldown the Mosfet.

BlHeli32 Firmware (support Dshot150/ Dhsot300 /Dshot600/ProShot 1000)

8 Pin JST connector and 8 Pin solder pads

Holes for Aluminum Low ESR capacitor (included 35V 470uF Low ESR capacitor and a spare capacitor)

Onboard analog current sensor (Firmware Scale: 350)

ESC telemetry to read RPM and ESC temperature

Compatible with Bidirectional Dshot out of the box

Zeez RGB LED strip specifications: 

Zeez Led System include 4 strip of RGB led light

10 RBG Led on every strip

Max Current Draw (10 led ON, white color): 0.6A @ 5V

Dimension 35mmx7.5mm (the smallest RBG strip for FPV drone on the market)

 

Zeez 3030 STACK (with LED) includes:

(1X) Zeez F7 Flight Controller

(1X) Zeez 60A 4in1 ESC

(1X) Zeez Led System (4 led Strip)

(8X) Aluminum Standoff

(4X) Aluminum Nut

(1X) ESC to Flight Controller 8 Pin to 8 Pin JST SH 1.00mm connector

(1X) ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp) JST SH 1.00mm connector

(1X) ESC to Flight Controller 8 Pin to Servo Connector JST SH 1.00mm connector

(1X) JST SH 8 Pin Plastic Housing

(1X) JST SH 10 Pin Plastic Housing

(6X) Led Strip to Flight Controller 3 pin JST SH 1.00mm connector

(2X) 470uF 35V Low ESR Capacitor

(1X) XT60 with 12AWG Silicon Cable for battery connection

(2X) 2.00mm Header Pin for VTX connection

(2X) 2.54mm Header Pin for Receiver connection

(4X) Spare M3 rubber anti vibration for Flight Controller or ESC

 

110,00 €

88,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1

Zeez F7 Flight Controller

 

SPECS

Up to 8S input (max 36V)

5V BEC up to 3A continuous

STM32F722 MCU

MPU6000 Gyro/ACC for smooth performace

128MB OnBoard flash

OSD chip Onboard

6 available UARTS

VTX switch to control the ON/OFF of the VTX

directly from your transmitter

LC Filter for 5V VTX

USB Type C connector

Onboard RGB LED distribution for clean wiring

to the LED on the arm of the quad.

Onboard RBG LED

Notch desing on sides and in the front of the – FC

for better fitting on the frame

 

45,00 €

  • on stock!
  • 1 - 3 Tage Lieferzeit1
Download
ZEEZ F7 FC Anleitung englisch
ZEEZ-F7-manual-v0.1.pdf
Adobe Acrobat Dokument 3.1 MB