FEATURES
6 WS2812 2020 RGB LEDs, bright and every color choosable
easy handling
only one additional GND-wire needed when connected to FETtec ESC
low resistance
for use with 3 - 6s
2 FETtec Race Wire 6 can be combited on one arm
configurable via FETtec Configurator / KISS GUI, Transmitter and OSD
DIMENSIONS
8 mm x 35 mm
Weight: 1g
IN THE BOX
2x FETtec Race Wire 6
10,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
5050 RGB LEDS INTEGRATED INTO RACEWIRE.
Racelites brightness changes with throttle input.
These are not constant on full brightness.
They illuminate only when motors are spinning.
These are integrated Racewire and Racelites.
These can be installed in any direction.
There are pads to Allow you to wire up additional Racelites to the bottom of your Arms.
Use the pads labeled "1,2,3" and wire them to the same pads on the under arm LED.
You must insulate the bottom of the boards.
COLOR BREAKOUT:
Not Soldered= -
Soldered= |
BLUE / RED / GREEN
Yellow - | |
White | | |
Cyan. | - |
Green - - |
Blue | - -
Red. - | -
Pink/Purple | | -
SPECS
Dimensions:8 x 40 mm
Voltage: 4-6s
Contents: 1x RGB RaceLiteWire Full Size
IN THE BOX
4 STK.
11,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
SPECS
Dimensions: 8 x 25 mm
Voltage: 4-6s
Contents: 1x RGB aceLiteWire Mini
Weight: .7 grams each
You must insulate the bottom of the boards.
IN THE BOX
4 STK.
11,00 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen
SPECS
2oz 2layer copper board
40 x 8 x 0.8mm
Comes in a set of 6 individual boards.
12,50 €
inkl. MwSt, zzgl. Versandkosten
Versandkostenfrei in folgende Länder: Mehr anzeigen Weniger anzeigen